Always
Print at Full Speed
With 20000mm/s2 acceleration, K1
ramps up to 600mm/s in only 0.03 seconds, delivering full speed in 90% of the
printing time.
Dual
Fan Model Cooling
A large fan on the printhead with
air ducts cools the model directly. An 18W auxiliary fan in the build chamber
enhances the cooling effect, too.
Creality
Print 4.3" Speed Genes
The latest self-developed slicer
Creality Print 4.3 includes rich presets, and streamlines the slicing process
into 3 simple stages. Even better, it bolsters high-speed printing with
variable line width, arc path, and so on.
AI
Enhancements
The 1 μm resolution LiDAR will
scan the first layer on its own. It will pause printing and tell you
immediately if something goes wrong. K1 Max uses an AI camera to watch over
spaghetti failure, foreign objects, debris, and more. It will alert you when an
error occurs and also supports real-time monitoring and creates time-lapses for
sharing.
Enhanced
Computing Power
K1 Max adopts the smart Creality
OS. It features a straightforward UI, and syncs data and commands with PC,
phone, Cloud, and add-on modules. The snappy dual-core 1.2GHz CPU powers
high-speed printing with ease. The 8GB ROM stores up to 400 model files and
enables quick writing and reading.
Connectivity
Once K1 Max is connected via Wi-Fi
or RJ45 Ethernet port to the LAN or Internet, you can monitor and control the
printing from a PC or phone with Creality Print software or Creality Cloud.
Pre-Assembled
Design
K1 is assembled and calibrated
before shipment and offers a boot-up quick guide. Just start printing the
moment your K1 arrives.
Easy
Self-Testing Capabilities
Give a tap, and K1 will self-test
the extruder, heat bed, camera, fan, leveling, etc. Any abnormality detected
will prompt on the display. So, users can proceed confidently without a hitch.
Hands-Free
Auto Leveling
An array of strain sensors is
embedded in the heat bed to generate an accurate leveling mesh. The whole
process happens on its own after the printing starts. You don't need to lift a
finger or pay any attention.
Integrated
G-Sensor
A G-sensor in the printhead
measures the resonance frequencies of high-speed printing and auto-tunes the
printer to mitigate it. No more ghosting or ringing on the print.
Built-In
Air Purifier
The built-in air filters will
purify unhealthy compounds generated during printing, making printing much more
pleasant.
Filament
Compatibility
The K1 is compatible with ABS,
PLA, PETG, PET, TPU, PA, ABS, ASA, PC, PLA-CF, PA-CF, and PET-CF filaments.
In the Box
- Stock: In Stock
- Model: 3DP-CR-K1M