OVERVIEW
OF NEPTUNE 3 PRO: 225*225*280mm printing size can meet the needs of most
users. With an STM32 motherboard, all axes of ELEGOO Neptune 3 Pro are driven
by silent stepper motors for quieter and more precise movement during printing,
which reduces the noise as low as 47-48dB. The easy-to-setup printer comes with
the main components pre-assembled, as well as a complete tool kit for quick
installation.
DUAL-GEAR
DIRECT EXTRUDER: The new dual-gear direct drive extruder is made of SUS303
high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion
force for smoother filament feeding and more stable & accurate printing,
which greatly reduces nozzle clogging and under-extrusion issues, printing
effect is better than Bowden extruder. Compatible with multiple filaments such
as PLA, TPU, PETG, and ABS.
NOZZLE
KIT FOR BETTER PRINTING EFFECT: The nozzle kit contains a TC4 titanium alloy
throat pipe, an aluminium alloy flat heat sink structure, and a brass nozzle.
The widened aluminium heat sink paired with the front close-fitting efficient
cooling fan for a better heat dissipation effect and lower the temperature of
the throat pipe, thereby reducing the possibility of nozzle clogging. Fans on
both sides of the print head ensure omnidirectional and rapid cooling of
printed layers to improve the model details and overhang printing effect.
SMARTER
PRINTING EXPERIENCE: Auto mesh bed levelling adopts a non-contact high
precision sensor to automatically scan 36 (6x6) points of the hotbed and collect
data in real-time, and then adjust the Z-axis height to compensate for any
irregularities and unevenness of the printing platform. (Only applicable to
metal printing platforms) Intelligent fan control: after printing, all fans
will automatically stop working below 50℃ to extend fan
lifespan, reduce noise, and save power. Smart resume printing: the printer will
auto-pause when the filament runs out or breaks, and you can resume printing
after a power outage.
MORE
STABLE PRINTING: The Z-axis with dual synchronized lead screws and dual-motor
drive for more stable movement of the print head and higher printing accuracy,
avoiding the printing deviation driven by a single Z-axis lead screw motor. The
4-wheel V-guide rail pulley is made of POM with more stable movement, low
noise, wear resistance, and longer service life.
EASE
OF USE: PEI magnetic platform with a special coating and spring steel sheet for
good adhesion and anti-warping, so that prints can be easily released or popped
off by bending the print steel sheet. The 4.3-inch removable capacitive touch
screen can be operated by hand-held or fixed on the base. Built-in print model
preview function to preview the model image before printing and observe the printing
progress. The 250W high-power hotbed can quickly heat up to 100ºC and start
printing. The integrated LED light bar on the gantry can be operated by
pressing the buttons on the screen to conveniently observe the model printing
in a poor light environment.
Bed Levelling | |
36-point Auto-levelling | |
Extruder Type | |
Dual Direct extruder(385g) | |
Fan Type | |
4010 Hydraulic blower fan | |
Firmware Type | |
Marlin | |
Hotbed | |
250W, 100C | |
Max Nozzle Temperature: | |
260C | |
Maximum Speed of Fans | |
7000r/min | |
Print volume | |
225x225x280mm | |
Support Materials | |
PLA/ABS/TPU/PETG | |
Transfer Method | |
SD Card | |
X, Y-axis | |
POM V-guide rail |
- Stock: In Stock
- Model: 3DP-ME-ENP3