Jamghe 405nm C&B Resin A3 Shade Resin - 1Kg

Product Technical Parameters Before Curing

Viscosity: 300~500mPa·s (NDJ-8S rotary rheometer（25℃）)
Density: 1.05~1.25g/cm3 (densitometer(25℃))

Recommended Print Parameters

Recommended printing time:

Bottom exposure time 25-35s

Normal exposure time 2.5s-3.5s. (6.6 inches black and white screen, light intensity 3500~4500µw/㎝²)

Bottom Lift Distance: 6mm

Lifting Distance: 6mm

Bottom Lift Speed: 60mm/min

Lifting Speed: 80mm/min

Retract Speed: 150mm/min

Wavelength: 385~410nm

3D printing Test Environment and Standard:

①Temperature: 23±2℃

②Relative humidity: 50%RH±5%RH

③The standard of the test piece: ASTM

④Post curing condition: The test piece was placed in water under 405nm ultraviolet radiation of 200mw/cm² for one minute.

Technical Parameters after printing:

1、Maximum force(KGF):165.7±10%

2、Tensile strength(MPa): 39.06±10%

3、Deformation of maximum point of force(mm): 5.32±10%

4、Elongation at yield point(%): 5.71±10%

5、Elongation at break(%):9.4±10%

6、Maximum bending strength(MPa): 48.93±10%

7、Flexural modulus(MPa):1412.8±10%

8、Hardness(Shore D)：80-86

9、Impact strength(j/m):80±10%

10、Tensile modulus：538.41±10%