Product Technical Parameters Before Curing
Viscosity: 300~500mPa·s (NDJ-8S rotary rheometer(25℃))
Density: 1.05~1.25g/cm3 (densitometer(25℃))
Recommended Print Parameters
Recommended printing time:
Bottom exposure time 25-35s
Normal exposure time 2.5s-3.5s. (6.6 inches black and white screen, light intensity 3500~4500µw/㎝²)
Bottom Lift Distance: 6mm
Lifting Distance: 6mm
Bottom Lift Speed: 60mm/min
Lifting Speed: 80mm/min
Retract Speed: 150mm/min
Wavelength: 385~410nm
3D printing Test Environment and Standard:
①Temperature: 23±2℃
②Relative humidity: 50%RH±5%RH
③The standard of the test piece: ASTM
④Post curing condition: The test piece was placed in water under 405nm ultraviolet radiation of 200mw/cm² for one minute.
Technical Parameters after printing:
1、Maximum force(KGF):165.7±10%
2、Tensile strength(MPa): 39.06±10%
3、Deformation of maximum point of force(mm): 5.32±10%
4、Elongation at yield point(%): 5.71±10%
5、Elongation at break(%):9.4±10%
6、Maximum bending strength(MPa): 48.93±10%
7、Flexural modulus(MPa):1412.8±10%
8、Hardness(Shore D):80-86
9、Impact strength(j/m):80±10%
10、Tensile modulus:538.41±10%
- Stock: In Stock
- Model: Jamghe 405nm 10k Standard Plus Resin-Almond